Toronto Garage Door Installation
Toronto Door Repair 866-820-1331
Toronto Garage Door Installation
Garage door installation is not that easy. Homeowners attempting to install garage doors on their own often land into trouble. Most of the time, professional help will make things easy. In this article, we will discuss certain information that will be helpful for your next garage door installation.
Garage Door Spring
During garage door installation, spring is one of the important considerations. A standard torsion spring system is very difficult to get installed/replaced by homeowners on their own. To the contrary, an extended spring system is easier for home-owners to take an attempt at. Check manufacturer’s specifications if you are not sure about the current spring system you have.
Follow Installation Instructions
In case of a new garage gate installation, keep the installation instructions handy if you are attempting to install on your own. Read the instruction manual beforehand. The standard tools that you will require are- a level, tape measure, electric screwdriver, hammer, and pliers.
Remember that a new garage gate comes in multiple sections. Each section contains an assembly that must be assembled before hanging them. You can use a sawhorse or workbench for assembling the garage door pieces. This process is expected to consume considerable time.
If you have an old garage gate, you need to remove it before new garage gate installation. After removing the old door and metallic track, you need to inspect the frame to be sure that there is no rot or damage in it. The most crucial step during garage door installation is to ensure that the first section of the door is fitted to level. This is important because all the remaining pieces are stacked on top of this first piece. If the first section is not fitted properly, the garage door will appear crooked. The brackets of the first section need to be fitted with extra care and be tightened properly.
After installing the first section, you need to attach the first section of the track and the corresponding rollers. After the completion of the first set, proceed to install the second section, second section of the track and the corresponding rollers. Repeat the process until all sections are fitted.
The next step in garage door installation is the installation of the horizontal tracks across the ceiling. You can use a ladder or similar tool to hold the horizontal track up while you work on the bracing. The level of the track needs to be maintained.
Lastly, install the spring system. Spring systems vary greatly and you should use the manufacturer’s installation manual closely.
Need for Installation Experts
Garage gate installation experts are always on high demand. There are four primary reasons for this. Firstly, the installation experts have the necessary expertise. Secondly, they can save a lot of your valuable time. Thirdly, they can customize the look and feel of your garage door if you want. Last but not the least, many garage installation specialists offer warranties on the parts they have used.
Therefore, consider the services of specialists seriously before you attempt to install your new garage door on your own.